Open Jobs

Position SummarySeeking a Certified Welding Inspector responsible for ensuring that all welding activities performed on industrial construction projects meet project specifications, code requirements, and company quality standards. This role oversees welding procedures, monitors welder performance, conducts inspections and testing, and prepares detailed documentation required for project turnover and regulatory compliance.Key ResponsibilitiesWelding Inspection & Quality ControlPerform inspections of weld fit-up, joint preparation, final welds, and weld finishes.Verify compliance with approved Welding Procedure Specifications (WPS), Procedure Qualification Records (PQR), and Welder Qualification Records (WQTR).Monitor preheat, interpass temperature, welding parameters, and consumable storage/handling.Check weld size, profile, root pass, fill passes, and final cap quality according to codes and project standards.Review weld maps, isometric drawings, P&IDs, and fabrication drawings to ensure correct weld identification.Conduct visual weld inspections (VT) and witness NDE activities such as MT, PT, UT, RT, and PMI as required.Verify filler metal traceability, heat numbers, and material certifications (MTRs).Quality Assurance & ComplianceEnsure compliance with welding-related requirements of ASME, AWS, API, and project specifications.Monitor contractor or in-house welding crews for adherence to approved procedures and quality controls.Participate in audits of welding programs, consumable handling, and welder continuity logs.Support root-cause analysis and corrective actions for weld defects, repair cycles, and non-conformances.Perform surveillance inspections during fabrication, erection, and installation of piping, structural steel, and equipment.Documentation & ReportingPrepare detailed weld inspection reports, NCRs, repair logs, and test records.Maintain welding logs, welder continuity records, consumable tracking sheets, and weld traceability documents.Support NDE documentation and ensure results are incorporated into quality records.Assist with creation and turnover of Quality Dossiers, including weld maps, ITPs, weld data books, and completion packages.Document all inspections with photos, checklists, and daily quality reports.Testing & VerificationWitness hydrostatic and pneumatic pressure tests related to welded systems.Review NDE reports and confirm acceptance criteria per code and project specification.Verify repairs, re-welds, and final acceptance after NDE or visual inspection.Safety & Work CoordinationPromote and enforce safety standards around welding, cutting, and hot work operations.Stop work immediately when unsafe or non-compliant welding activities are observed.Coordinate with welding supervisors, foremen, NDE technicians, construction management, engineering, and client QA representatives.

DescriptionThe Single Hand Pipe Welder is responsible for operating welding machines to join or connect various types of pipe and fittings in an oil and gas industry setting. The incumbent will be responsible for selecting and setting up welding equipment. Job tasks and assignments may vary daily.Essential Job FunctionsReads blueprints, drawings and welding diagramsInterprets isometric drawings and determines which specifications to applyOperates hand and power tools common to welding such as shielded metal arc and gas metal arcHold, clamp heat-bend, tack-weld or bolt component partsIgnites and installs torches and beveling machines within specificationsWelds using stainless steel, carbon steel and duplex materialsMaintains machines and inspects equipment to identify possible problemsOther duties as assigned

Job DescriptionResponsible for performing pipe welding procedures on Stainless Steel and Copper-Nickel pipe using Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding. The shipyard environment is an around the clock manufacturing setting. Production areas at times involve working at different heights, confined spaces, different weather conditions as well as multiple shifts 24 hours a day. As with most every position in the shipyard, a Welder may be required to work either day or night dependent upon the number of ships under construction at any one point in time. Client stresses the practice of working safely in all situations with safety procedures meeting, and most times, exceeding industry standards. Types of metal materials with a variety of welding processes; the most basic of which are, Shielded Metal Arc Welding (SMAW) also known as "stick welding” and Flux-Core Arc Welding (FCAW) also known as “wire welding.” Must pass military standard X-Ray welding test on stainless steel and copper nickel in the 6G position (restricted). The pipe welding test is given in a restricted position (6 G) on a 5'' schedule 80 carbon steel pipe. GTAW (TIG) process used for root pass, 11018 electrode used for weld fill portion and cap.

OverviewWe are seeking experienced Structural Welders to support marine vessel construction and repair projects in Goose Creek, SC. The ideal candidate will have extensive shipyard or marine welding experience, strong blueprint reading skills, and the ability to perform high-quality structural welds using multiple welding processes.ResponsibilitiesPerform structural welding on marine vessels, ship components, and offshore structuresWeld using SMAW (Stick), FCAW, GMAW (MIG), and/or GTAW (TIG) processes as requiredRead and interpret blueprints, weld symbols, and technical drawingsFit, fabricate, and repair structural components according to specificationsPerform welding in flat, horizontal, vertical, and overhead positionsOperate hand tools, grinders, torches, and welding equipment safely and efficientlyInspect completed welds to ensure quality and compliance with project standardsFollow all shipyard, OSHA, and safety regulationsWork in confined spaces, at heights, and in varying weather conditions as requiredMaintain a clean, safe, and organized work environment

An established marine and industrial contractor is seeking an experienced Painter/Blaster Foreman to lead a short-term project in Everett, Washington. This is a hands-on leadership position responsible for overseeing blasting and painting operations while ensuring work is completed safely, efficiently, and to quality standards.ResponsibilitiesLead and supervise a crew performing abrasive blasting and industrial paintingPerform hands-on blasting and painting as neededOversee work on scaffolding and ensure compliance with all safety proceduresCoordinate daily tasks to keep the project on scheduleMonitor quality of surface preparation and coating applicationEnsure proper use of equipment, materials, and PPECommunicate effectively with project management and crew membersProject DetailsBlast and paint a marine caissonApply Fast Clad industrial coating systemWork will be performed from scaffolding

A leading marine and industrial contractor is seeking Painter/Blasters for a short-term project in Everett, Washington. This position is ideal for candidates with experience working in industrial, marine, or heavy construction environments.Job DutiesPerform abrasive blasting and industrial painting on a large marine caissonApply industrial protective coatings (Fast Clad)Work safely from scaffolding at varying heightsFollow all safety procedures and job site requirementsMaintain quality workmanship while meeting project deadlines

Bechtel's Renewables & Clean Power business line is hiring for a large-scale power generation project in Pecos, TX. The project is being developed to support growing energy demand driven by data centers, AI, and digital technologies, with Bechtel leading early development activities ahead of full EPC execution.ResponsibilitiesCDL Required.Operates light equipment including but not limited to for operating Fuel Truck and Water Truck.

Bechtel is delivering the infrastructure, technologies, and fuels to sustainably meet the world’s increasing energy demand. On the US Gulf Coast, we are currently delivering four mega LNG Projects – Corpus Christi Liquefaction, Louisiana LNG, Port Arthur LNG, and Rio Grande LNG.ResponsibilitiesAssembling, mounting, and installing control panels, instruments, and sensing devices as per manufacturer instructions and design specifications.Plan layouts and installations in line with provided drawings and instructions.Assembling and installing instrument stands, brackets, and piping for pneumatic and hydraulic systems, along with conducting pressure testing for system integrity.Tubing bending and installation and be proficient in reading various types of drawings.Working efficiently, maintaining cleanliness, and performing regular maintenance on tools and equipment are essential aspects of the role.Preparing and recording installation documents and conducting inspections with engineers and clients as per procedures.

Bechtel is delivering the infrastructure, technologies, and fuels to sustainably meet the world’s increasing energy demand. On the US Gulf Coast, we are currently delivering four mega LNG Projects – Corpus Christi Liquefaction, Louisiana LNG, Port Arthur LNG, and Rio Grande LNG.ResponsibilitiesAdhere to established company policies and procedures paying special attention to safety regulations.Assemble, mount and installs control panels, instruments, associated sensing devices that measure, indicate, transmit, record and control.Plan layout and installation in accordance with manufacture instructions, specifications, issued design details and drawings.Assemble and install instrument stands, brackets, trays, clamps and hangers as required to properly secure instrumentation and other associated components.Measures, cuts, threads and installs small bore piping typically associated with pneumatic and hydraulic systems.Perform pressure testing of installed tubing and small bore pipe as required to prove integrity of system.Works in a timely manner, accurately and, maintains an orderly and clean work area.Performs regular maintenance and cleaning of tools, equipment and instrumentation (both installed and pre-installed).Prepare and record QC installation documents, perform installation inspections with Engineers and Client as per Installation Testing Procedures (ITPs).

Job DescriptionPipefitter, is responsible for fitting pipe consisting of various materials such as steel, galvanized, copper, copper-nickel and stainless along with the appropriate valves and fittings, utilizing various tools and equipment in accordance with drawing, arrangements and blue prints. Production areas at times involve working at different heights, confined spaces, different weather conditions as well as multiple shifts 24 hours a day. As with most every position in the shipyard, a Pipefitter may be required to work either day or night dependent upon the number of ships under construction at any one point in time. We stress the practice of working safely in all situations with safety procedures meeting, and most times, exceeding industry standards.

Trillium Construction is now seeking Excavator Operators in Grand Rapids, MI!Will be working on riverbank restoration project, operating GPS excavators, dozers, front end loaders, etc.Starts ASAP.56 hours/week, year-long project.

SYNERGY LABOR SOLUTIONS IS LOOKING FOR AN ELECTRICIAN IN NEWTON, NCStart Date: 7/6/26Scope Of Work:Connection of machines to provide drops with power convertors installed by factory

We are currently hiring experienced Industrial Electricians for a long-term project located in Cape Canaveral, Florida.Project DetailsPay Rate: $40.00 per hourProject Duration: Approximately 8 monthsLocation: Cape Canaveral, FloridaThis project is open to U.S. citizens only. All applicants must be able to provide proof of U.S. citizenship by presenting a valid U.S. passport or an original birth certificate.Scope Of WorkInstalling, bending, and running rigid conduitCable tray installationWire pulling and cable routingElectrical terminationsTransformer installation and connectionsElectrical panel and switchgear workReading and interpreting electrical blueprints and schematicsTroubleshooting industrial electrical systemsFollowing jobsite safety procedures and quality standards

Tradesmen International is immediately hiring experienced Electricians for projects located in and around Claude, TX. This is a first-shift opportunity with a pay rate of $30/hour plus $130/Per Diem to Travelers 60+ miles from the job site. If you are an Electrician and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior craftsmanship, this is your chance to advance your career!Job ScopeCable tray installation (ladder, basket/wire mesh, trough, and channel tray)Reading and interpreting electrical blueprints and layout drawingsMeasuring, cutting, and assembling cable tray systemsInstallation of supports including Unistrut, trapeze systems, threaded rod, and wall bracketsPulling and routing power, control, and low-voltage cablesConduit installation (EMT, Rigid, IMC)Electrical terminations and device installationKnowledge of NEC requirements related to cable tray systemsExperience working from elevations and layout specificationsAbility to install tray systems at heights using lifts

Start Date: ASAPPay*INCREASED* Pay $38.00 to $45.00 per hour, plus $120.00 a day per diem, non-localJob DescriptionLay out, fits, aligns, and assembles prefabricated cast and forged components before welding, soldering, brazing, or bonding operations.Performs fitting and machining operations such as straightening, grinding, burr, drilling, reaming, and countersinking materials to close tolerances.Refers to general instructions to select equipment, set up, and layout materials to be welded.May repair or rework parts to restore them to required tolerances that have become distorted because of welding operations.May monitor and verify quality in accordance with statistical process.BenefitsMedicalDentalVisionYearly BonusConsistent WorkIndustry-leading payPeople First CultureWeekly Pay

Apprentice & Journeyman ElectricianAbout the RoleICON Electric is seeking experienced 3rd and 4th year Apprentice Electricians and Journeyman Electricians to join our growing team. This role is ideal for someone with strong commercial electrical experience, a solid understanding of electrical systems, and a desire to continue growing in their career.The successful candidate will be responsible for installing, maintaining, troubleshooting, and repairing commercial electrical systems while maintaining a high standard of safety, quality, and professionalism.Primary ResponsibilitiesTroubleshoot and repair electrical issues in commercial electrical systems.Work independently and efficiently with minimal supervision.Plan and perform installation and maintenance of electrical systems, including lighting systems, lighting controls, switchgear, branch and feeder installation, motors and motor controls, and device installation.Read and interpret blueprints, details, one-line diagrams, installation manuals, and specifications.Install electrical systems in accordance with project specifications, company standards, and NEC requirements.Manage, track, and order materials needed for assigned installations or service work.Apply a strong understanding of electrical theory to daily work.Communicate professionally with customers to understand and resolve electrical issues.Coordinate with office staff regarding scheduling, material ordering, job progress, and project tracking.Follow all job site safety procedures, company policies, and applicable OSHA requirements.Demonstrate advanced knowledge of NFPA 70E arc flash and hot work procedures.

MACHINNE MOVE FROM WAUKESHA, WI TO NACOGDOCHES, TXPay: $28.00Per Diem: $100 x 7MOBILIZATION: $600 (ONCE PROJECT IS COMPLETED)Start Date: 7/13/26Scope Of WorkMatch-mark and label mechanical connectionsDismantle machine componentsTransfer to crating areaCut off/ drive down any floor anchors flush with floor levelLayout floor using chalk and clear lacquer sprayUnload machineryRig and set machines in placeLevel using optical levels and spirit levelsAssemble fencing/guarding/safety doors/ etc. relative to machinery

Heavy Equipment Operator needed a construction project in Gauley Bridge, WV.Trillium Construction is looking for Excavator operator with experience running a Cat 336 with a jackhammer on a construction job site along with a Cat D6T and Cat 740 Articulating Truck.This Project is ongoing and will last 2 Months or until the project is completed. Start time is 6:30 am to 7:00 pm Monday - Saturday working 70 hrs a week.

We are currently hiring experienced Industrial Electricians for a long-term project located in Cape Canaveral, Florida.Job ScopeInstalling, bending, and running rigid conduitCable tray installationWire pulling and cable routingElectrical terminationsTransformer installation and connectionsElectrical panel and switchgear workReading and interpreting electrical blueprints and schematicsTroubleshooting industrial electrical systemsFollowing jobsite safety procedures and quality standards

We are looking for an experienced Project Manager to join our team. As a Project Manager, you play a key role in the success of Mullins Mechanical by ensuring successful completion of construction projects. The work location for this position will be based on assignment to a project location.ResponsibilitiesDevelopment and management of all project documentationSchedule and lead project hand-off meetings to ensure important job information is gathered before proceeding into construction phasePrepare construction budget by studying plans and specifications and identifying and projecting costs for each scope/item/division; convert estimates into cost budgets and verify cost code accuracyObtain appropriate permitsFinalize Schedule of Values for owner billingBuild and actively manage the project schedule with the field supervisorsComplete job number request forms and submit to accounting for job number assignmentPrepare electronic timesheet to match cost code breakdownEnsure project financial success by establishing and managing project schedules and budgets, preparing and reporting monthly on job cost, and actively work to ensure project profitabilityDevelop and write subcontracts and purchase orders as required including negotiating terms, price, deliveries, and restock feesContractually manage subcontractorsSubmit new vendor/subcontractor form to AP prior to job startPrepare material status log and update continuallyCollect and organize submittals and product samples for approval as neededPrepare productivity tracking logs and update dailyPrepare/review daily pipe and structural weld reports/inspection reports for tracking purposesPrepare PMIs (internal running punch list) and review with construction teamCreate and distribute RFIs for information and clarification of project specificsPrepare monthly project billing and/or invoicesSubmit credit card receipts weekly (Refer to the Corporate Credit Card Agreement)Resolve cost discrepancies by collecting and analyzing informationCollaboratively price, negotiate, and formalize all changes in project scopeProvide adequate Notices of Delay to Owners, General Contractors, and Sub-Contractors to document external schedule impactsWork collaboratively with Assistant Project Managers and Superintendents on their requests for resources as required to meet project schedulesHire field personnel as needed and work with HR to schedule onboarding of personnelEnsure client satisfaction while balancing competing demands among scope, time, and costReview time sheets for accuracy and submit to HR/Payroll for processingConduct direct report employee reviews annually or more often if neededManage safety, quality, and productivity of the projectPrepare/review safety and quality incident reports and submit to HRSubmit employee reprimand, termination, and request off forms to HRApprove invoices in accounting software weeklyEnsure jobsite remains clean and orderlyUpdate Opportunity Project Tracking Form and submit to CRM Manager

Trillium Construction has an immediate opening for experienced Pipe Fitters for a project in Franklin, IN. This project starts ASAP and is scheduled to run through November 25, 2026.Project Schedule60 hours per weekMonday - SaturdayJob DutiesFit 4"-6" carbon steel pipeFit 5", 6", and 8" pneumatic pipeFit threaded pipe up to 2"Heavy amount of threaded pipe fittingMust be comfortable working at heights of 30-60 feet

SEEKING MILLWRIGHT/WELDERS FOR A LONG TERM PROJECT in OKC ASAP!!!!!!!Project DetailsLong Term project at UPS will be running until FALL of 2027Working 50 hours weeklyWill be working and welding on conveyor systems, bolt up, rigging, etc.

We are looking for an experienced Project Manager to join our team. As a Project Manager, you play a key role in the success of Mullins Mechanical by ensuring successful completion of construction projects. The work location for this position will be based on assignment to a project location.ResponsibilitiesDevelopment and management of all project documentationSchedule and lead project hand-off meetings to ensure important job information is gathered before proceeding into construction phasePrepare construction budget by studying plans and specifications and identifying and projecting costs for each scope/item/division; convert estimates into cost budgets and verify cost code accuracyObtain appropriate permitsFinalize Schedule of Values for owner billingBuild and actively manage the project schedule with the field supervisorsComplete job number request forms and submit to accounting for job number assignmentPrepare electronic timesheet to match cost code breakdownEnsure project financial success by establishing and managing project schedules and budgets, preparing and reporting monthly on job cost, and actively work to ensure project profitabilityDevelop and write subcontracts and purchase orders as required including negotiating terms, price, deliveries, and restock feesContractually manage subcontractorsSubmit new vendor/subcontractor form to AP prior to job startPrepare material status log and update continuallyCollect and organize submittals and product samples for approval as neededPrepare productivity tracking logs and update dailyPrepare/review daily pipe and structural weld reports/inspection reports for tracking purposesPrepare PMIs (internal running punch list) and review with construction teamCreate and distribute RFIs for information and clarification of project specificsPrepare monthly project billing and/or invoicesSubmit credit card receipts weekly (Refer to the Corporate Credit Card Agreement)Resolve cost discrepancies by collecting and analyzing informationCollaboratively price, negotiate, and formalize all changes in project scopeProvide adequate Notices of Delay to Owners, General Contractors, and Sub-Contractors to document external schedule impactsWork collaboratively with Assistant Project Managers and Superintendents on their requests for resources as required to meet project schedulesHire field personnel as needed and work with HR to schedule onboarding of personnelEnsure client satisfaction while balancing competing demands among scope, time, and costReview time sheets for accuracy and submit to HR/Payroll for processingConduct direct report employee reviews annually or more often if neededManage safety, quality, and productivity of the projectPrepare/review safety and quality incident reports and submit to HRSubmit employee reprimand, termination, and request off forms to HRApprove invoices in accounting software weeklyEnsure jobsite remains clean and orderlyUpdate Opportunity Project Tracking Form and submit to CRM Manager

Licensed Journeyman Electricians - Direct HireSanta Teresa, New MexicoJoin one of the nation's largest hyperscale AI data center construction projects!We are seeking Licensed Journeyman Electricians for a long-term, direct-hire opportunity on a major mission-critical facility in Santa Teresa, NM.Project ScheduleSchedule: 6 days/week, 10-hour shiftsOvertime: All overtime paid at Double Time (DT)Duration: Long-term project expected to run through the end of 2027Employment Type: Direct Hire with our clientPrimary ResponsibilitiesInstall EMT, RMC, PVC conduit, cable tray, and support systems.Pull, route, terminate, and test power and control wiring.Install switchgear, transformers, panelboards, disconnects, and electrical distribution equipment.Read and interpret blueprints, one-line diagrams, and electrical schematics.Assist with equipment installation, startup, and commissioning.

Now Hiring: Nebraska Journeyman Licensed Electricians - Gretna, NE (per diem paid all 7 days)Trillium Construction is seeking Nebraska Journeyman Licensed Electricians for long-term commercial work in Gretna, NE.Project DetailsNew construction and remodels of gas station stores, fuel pumps, and car washesRunning new wire and terminatingUpgrading petroleum wiring systemsProject ScheduleMonday-Friday40-48 hours per week6:00 AM - 4:00 PMProject expected to last through the end of November 2026If you're a licensed Nebraska Journeyman Electrician looking for steady, long-term work with competitive pay and per diem, apply today!